MAINTENANCE
DRONE PARTS
1. Use a clean soft cloth to clean this product frequently.
2. Avoid heating or prolonged exposure to the sun.
3. Don’t put the product in water. It will damage electronic parts.
4. Please check the plug and other accessories at regular intervals. If there is any damage, please stop using it immediately
until it is repaired completely.
1. HD Camera
2. Landing Rack
1. Battery power indicator
2. USB charging port
3. Battery switch
REMOTE CONTROL
1. Throttle joystick.
2. Direction joystick.
3. Press for one button RETURN HOME; press again to cancel Return Home.
4. ON / OFF.
5. One button take off with auto hover, one button landing
Hold 3 secs for Emergency stop.
6. USB charging port.
7. Speed+/Speed-.
8. Click once, enter Follow-me mode; Click again, cancel the follow-me mode.
Hold the button for 3 seconds, enter Trim mode. Click the button, cancel
Trim mode.
Note: No need to trim under the GPS mode.
9. Click once to toggle headless/normal mode. Hold the button for 3 seconds
to turn off GPS mode.
10. Adjust the angle of camera: Spin button down: camera down. Spin button
up: camera up.
11. Click the button to take photo.
12. Click the button to take video; Click the button again to cancel video mode.
13. Phone Holder.
14. Power
15. Speed
16. Video
17. Return Home
18. Charging
19. Headless Mode
20. Follow-me
21. Trim - See #8 above for access to trim mode
3. Blade
4. Motor
5. Blade Protector
6. LED indicator
Page 4
GPS SHADOW
DRONE
