PROMAG
STARGEL HF 35 - HF 60 - HF 90
40
GB
DISPLAY
CAUSE
A 30 - IMPORTANT
All STARGEL HF machines incorporate a self-diagnosis system that indicates any machine
malfunctions.
The following are examples of what could appear on the display and what these indicate.
In all cases the acoustic signal can be turned off by pressing button
7
.
Whenever a malfunction is displayed, the best thing to do is make a note of the display and contact the
service man.
A 30.1
ATTENTION:
In the case of a power failure (black-out), as indicated above, the machine will shut down. When the
power comes back on the word “OFF” will be flashing on the display.
Before going back to making ice cream, make sure the mixture is still fluid, to prevent the motor
from blocking as this can damage the motor windings.
OPEn + acoustic signal
Door open
H2O + acoustic signal
Refrigeration circuit pressure switch activated.
No water intake from the mains.
Check to see that the water tap is open.
Check water delivery of the water web.
T1 + acoustic signal
Compressor thermal switch activated.
The restoration of the thermic is automatic and happens as the
temperature of the engine windings has gone under the safety levels.
To continue the production one need to restart the work cycle wanted.
T2 + acoustic signal
Speed one motor thermal switch activated.
Press the button marked
T2
on the right-hand side of the machine.
Wait a few minutes before reactivating.
T3 + acoustic signal
Speed two motor thermal switch activated.
Press the button marked
T3
on the right-hand side of the machine.
Wait a few minutes before reactivating.
OFF flashing
There has been a power failure.
Press button
7
or
8
.
H5
Inefficiency of the compressor
Содержание Stargel HF 35
