Prolux MATRIX BAR 6, Руководство пользователя

Страница: 21 / 21

http://prolux.net.ua
21

Connection of control board is not correct. Call a qualified
personnel to fix it.
Out of console’s control

Please check the DMX connector and the power connection is
connected correctly or not. It means having signal if it shows
twinkling of the decimal point which in the lower right corner of
the screen when exiting the screen saver.

Please check the DMX address setting of lighting is correct or not.

Check
【
CHMD
】
setting is correct or not.

Please check whether the DMX line is near to the high voltage
wire or not. In that case, it will damage or interfere the DMX
electric circuit.
The beam appears dim,
the brightness declines
obviously

Check whether the
【
CAL
】
is started or not and the set value is
too small.

Check whether the
【
POW
】
is in over temperature protection
situation or not, if yes, please take measures for ventilation.