http://prolux.net.ua
20
6.14
LIGHTING PARAMETER DOWNLOADING EACH OTHER VIA DMX CABLE
1) Press the
【
ENTER
】
button in
【
SEND
】
menu, then enter to sending parameter to
other lightings.
2) Press the
【
UP/DOWN
】
button to select
【
YES
】
.
3) Press the
【
ENTER
】
button to confirm sending.
Illustrations
：
1)Please disconnect the connection of projector and DMX console before sending the
parameter.
2)The information of
【
ADDR
】、【
CAL
】、【
ID
】
can’t be sent, can’t be downloaded
each other.
3)There will be an automatic reset of the other projectors after receiving parameter
correctly.
6.15
ID ADDRESS SETTING
1) Press the
【
ENTER
】
button in
【
ID
】
menu, then enter to the ID address setting.
2) Press the
【
UP/DOWN
】
button to select
【
0-255
】
numerical value.
3) Press the
【
ENTER
】
button to escape and save.
Illustrations
：
1)When ID FUNCTION in channel profile is 10-20, the ID ADDRESS in fixture setting must
equal to the ID ADDRESS in channel profile setting then the fixture will be active.
2)When ID FUNCTION in channel profile is 21-30, the ID ADDRESS in channel profile
setting will be divided by 10 then ignore the fractional part, if the result is equal to the ID
ADDRESS which set in
【
ID
】
menu, the fixture will be active. For example, if the fixture
ID ADDRESS is 3 now, the valid value in the channel profile setting is 30-39. Similarly,
when 15 the valid value is 150-159.
7 TROUBLESHOOTING
Problem
Reason and action
The lighting can’t be
started normally
Check the power connection is correct or not.
Please detect the voltage.
Power supply is damaged or incorrect connected. Call a qualified
personnel to fix it.
