http://prolux.net.ua
19
8) Press the
【
ENTER
】
button to escape and save.
Illustrations
：
When
【
USE
】
is set to be
【
NO
】，
or the parameter of
【
TIME
】
is 0, it
will not run this scene. When
【
WAIT
】
is set to be FADE time, the running process is as
the following chart showing.
6.11
CHECK THE LIGHTING INFORMATION
1) Press the
【
ENTER
】
button in
【
INFO
】
menu, then enter to the checking the lighting
information.
2)
【
SOFT
】
button is for software version information.
3)
【
POW
】
button is for the current information of power reduction. It is 100% output
in normal conditions, but 80% or 50% output in over temperature protection situation.
6.12
LIGHTING SETTING PARAMETER RESET
1) Press the
【
ENTER
】
button in
【
ST L
】
menu, then enter to the lighting setting
parameter reset.
2) Press the
【
UP/DOWN
】
button to select
【
YES
】
.
3) Press the
【
ENTER
】
button to escape and save.
Illustrations
：
“ADDR” “CTST” and “PROG” are not reset, the others reset to the
underlined value of the word.
6.13
【
PROG
】
SELF-PROGRAMMING PARAMETER RESET
1) Press the
【
ENTER
】
button in
【
PR L
】
menu, then enter to the
【
PROG
】
self-
programming parameter reset.
2) Press the
【
UP/DOWN
】
button to select
【
YES
】
.
3) Press the
【
ENTER
】
button to escape and save.
