Prolitec AirQ AQ1200WHTTT-SS, Руководство пользователя

Страница: 10 / 16

AirQ Scent Shuttle User Guide
© 2015 Prolitec, Inc.
V. OPERATING INSTRUCTIONS
A. Unit Programming
1. Unlock and open the door
2. Turn on the power by pressing ON/OFF button in the upper left corner of the control panel.
3. Set the Clock
• Turn the dial to Set Clock. The day-of-week icon will blink.
• Adjust the day forward or backwards using the +/- buttons on the right side of the control panel.
• Press the Set button on the lower left corner of the LCD display. The time will blink.
• Adjust the time forward or backwards using the +/- buttons. AM or PM is indicated on the right side of
the time digits.
4. 24/7 Mode
• If you want the AirQ Scent Shuttle to run continuously -7 days a week, 24 hours a day 7 Days a week
turn the dial to Run 24/7. If not, skip to Step 5.
• You can adjust the fragrance intensity level (1 to 50) using the +/- buttons. Refer to Setting Scent Inten-
sity for the intensity level to set.
5. Set multi-program timer
• Turn the dial to Set Program. The Program icon comes on.
• The day-of-week icons will all blink, indicating you are selecting all days with the same program. If you
want to program a specific day, use the +/- buttons to select the day. You can set maximum of 3 on/off
programs same for every day or individually for each day. After selecting the day, press the Set button
to advance.
• Now the “1” icon is turned on to indicate you are setting program 1. The Rate digits blink to prompt you
to set the rate. You may set to any value between 1 to 50, or set to 0 to disable the program. Press the
Set button to advance.
• If you set the rate to 0, then the current and subsequent programs are all disabled. For example, if the
rate for program 2 is 0, then program 2 and 3 are disabled.
• If you set a non-zero rate, then the rate digit changes to “S” to indicate start time. The hour digit should
blink to prompt you to set the start hour. Use the +/- buttons to set the hour. Then press the Set button
to advance and set the minute. Press the Set button to advance.
• The rate digit now changes to “E” to indicate you are setting the end time. Use the +/- buttons to set
the end time. Press the Set button to advance to the next program.
• Program icon 2 should now turn on. Use the +/- and Set buttons to set the start and end times for
program 2 and then for program 3. Note that if you need only 1 or 2 programs for the day, you simply
disable the subsequent programs by setting its rate to 0.
• After setting the programs, turn the dial to Run Program.
8
OPERATING INSTRUCTIONS