14
Chapter 8
OPERATING INSTRUCTIONS
• Press
L
to set the status and the intensity will blink.
• Adjust the intensity up or down using
E
or
F
.
• Press
L
to set the intensity and the day of the week will blink.
• Adjust the day of the week forward or backward using
E
or
F
.
HINT: In addition to individual days, you can also
set “all days,” “week days,” or “weekend days.”
• Press
L
to set the day of the week.
S
tart
will display on the far right side and the hour will
blink.
• Adjust the start hour forward or backward using
E
or
F
.
• Press
L
to set the start hour and the minute will blink.
• Adjust the start minute forward or backward using
E
or
F
.
• Press
L
to set the start minute.
S
top
will display on the far right side and the hour will blink.
• Adjust the stop hour forward or backward using
E
or
F
.
• Press
L
to set the stop hour and the minute will blink.
• Adjust the stop minute forward or backward using
E
or
F
.
• Press
L
to set the step minute.
The appliance will automatically switch from set program to run program after 30 seconds of
inactivity, or you can press
I
until
SET PROGRAM
is displayed above the time. You may review the
programs by pressing
L
while the appliance is in run program mode.
Using the online SD card programming tool
The online SD card programming tool can be found at
1. Multiple programs sets can be created, which are unique to the user, and stored in a list.
2. Create a program set using the
CREATE PROGRAM
button.
• Each program set will require a name.
• Each program set can contain 21 unique programs, which can be turned on or off within the
set.
• Programs, identified by number 1-21, include a day or days, on/off times, and intensity
settings.
8
