Beta Draft Confidential
Network Page
Internet Managed Thermostat Configuration Guide, Release 1.0
2-39
Part No. 600-03001-550, Rev. 1
Use
Table 2-11
to configure the
General
fields.
Table 2-11 Network - General Field Descriptions
Field
Description
IP Addressing
IP Address Method
Select the method by which the thermostat receives the unique
Internet Protocol address for the local network. IP addressing
can be either automatically assigned via a local DHCP server or
manually (
Static
) assigned by the user.
DHCP
(default) – IP addressing method is DHCP assigned.
Static
– IP address is manually assigned by the user.
IP Address
Displays the unique Internet Protocol address either assigned
statically or by DHCP. (See
IP Address Method
.) (You must
click
Submit
after changing this parameter to invoke a software
reset to set the new value.)
A.B.C.D
– Four field standard dot notation for IP address
designation.
Subnet Mask
Displays the IP subnet on which the thermostat IP address is
assigned.
Default Gateway
Displays the IP address of the router which acts as a gateway for
the thermostats to communicate to other devices in another
subnet.
DNS Server
Displays the IP address of the Domain Name Server.
MAC Address
Displays a factory assigned value installed in the thermostat
which uniquely identifies the thermostat on the local network for
transmitting and receiving network information.
The system displays the MAC address in the format of
00:19:88:AB:CD:EF for IMT550w and 00:11:49:AB:CD:EF for
IMT550c, where AB:CD:EF is a unique value for each
thermostat.
Web Server
HTTPS Port
Enter the IP port number of the Web server within the
thermostat.
xyz
– Four digit (max) standard IP port number designation for
HTTP access. The default port number is
443
.
Allow HTTP
Disabled
Enabled
HTTP Port
The default is port
80
.
