Proliphix EPA-20, Руководство по установке

Страница: 7 / 8

Beta Draft Confidential
Mounting and Wiring the EPA-20 and EPA-60
Proliphix EPA-20 and EPA-60 Installation Guide, Release 1.0 3
Part No. 600-01004-000, Rev. 2
Figure 2 EPA-60 Wiring
6
Use a 110 punch down tool and punch each wire to one of the thermostat’s punch
down terminal pins. Refer to
Figure 1 and Figure 2 .
7
Match the adapter’s CAT5, CAT5E, or CAT6 Jack port(s) to the corresponding punch
down terminal port(s).
8
Plug a CAT5, CAT5E, or CAT6 patch cable from the adapter’s CAT5, CAT5E, or
CAT6 Jack port(s) to a router or Ethernet switch.
Ethernet
Power
Adapter
Model EPA-60
1
2
3
4
5
6
1
2
3 4
5 6
24
V
D
C
white-blue
white-orange
white-green
white-brown
blue
orange
green
brown
24VDC
Power Supply
CAT5
wire to
Proliphix
Device
CAT5 Cable to
Router or
Ethernet switch
110 Punch
down
Terminal
CAT5 jack
Note
The patch cable should be a straight through cable.
Caution
Do not apply power until the Proliphix thermostat is attached to the other end of
the CAT5, CAT5E, or CAT6 cable(s). Plug the 24VDC power supply into the
adapter which supplies power to the Proliphix thermostat attached to the adapter.