background image

PROLiNK

®

 PWH2004 User Manual 

 

www.prolink2u.com 

 
 

 

Revision 1.0 (Aug’09) 

18

 

 

 

4.5.2.

 

Internet Service Setup 

 

Select the WAN Connection Type Static (Fixed IP), DHCP (Auto Config), PPPoE (ADSL), or 3G (DIAL). Default 
setting is DHCP (Auto Config) enabled. 

 

DHCP 
(Auto Config) 

 

 

 
If the DHCP (Auto Config) be selected, the PC will obtain the IP address automatically. 
 
Hostname (optional):   

Enter the hostname that assigned IP address to user’s 
computer in this field. Maximum input is 32 alphanumeric 
characters (case sensitive). 

 

Static (Fixed IP) 

 

 

 
If the Static (fixed IP) be selected, user has to set up the IP address, subnet mask 
and default gateway according to the ISP that provided the related information. 
 
IP Address: 

Enter the WAN IP address provided by your ISP here. 

Subnet Mask: 

Enter the subnet mask here. 

Default Gateway: 

Enter the default gateway IP address provided by your ISP 
here. 

Primary DNS Server: 

Enter the DNS server IP address(es) that provided by your 
ISP, or you can specify your own preferred DNS server IP 
address(es). 

Secondary DNS Server: 

Secondary DNS Server is optional. You can enter another 
DNS server’s IP address as a backup. 

 

Содержание PWH2004


























































Отзывы: