PROLiNK
®
PWH2004 User Manual
www.prolink2u.com
Revision 1.0 (Aug’09)
12
4.4
Wizard (Gateway Mode)
4.4.1.
WAN Connect Detection
This page is used to detect the WAN connection of network. User can select Auto Detect form the pull-down
menu and click Start Auto Detect button, the system will detect whether there is WAN connection or not. If
user wants to set up the WAN detection manually, please select Manual form the pull-down menu, then click
Next to continue.
Select
To use the WAN detect function, user can select Manual or Auto Detect form the
pull-down menu.
WAN Detection
Select Auto Detect form the pull-down menu and click Start Auto Detect button, the
detecting screen will be pop-up to detect whether there is WAN connection or not.
If user wants to set up the WAN detection manually, please select Manual form the
pull-down menu, then click Next to continue.
Detect Result
Here shows the WAN detection result. If there is no WAN connection, the system
will show NONE or Unplugged Cable.
4.4.2.
WAN Access Types
Here user can set up the WAN connection type easily. Select the WAN Connection Type Static (Fixed IP),
DHCP (Auto Config), PPPoE (ADSL), or 3G (DIAL) and click Next to continue.
Static (Fixed IP)
If the Static IP be selected, user has to set up the IP address, subnet mask and
default gateway according to the ISP that provided the related information.
IP Address:
Enter the WAN IP address provided by your ISP here.
Subnet Mask: Enter the subnet mask here.
Default Gateway: Enter the default gateway IP address provided by your ISP here.
