PROLiNK Hurricane 9200/S, Руководство пользователя

Страница: 28 / 205

Hurricane 9200/S ADSL Ethernet Router User’s Guide
28
You are now finished installing the driver. After restarting your
computer, proceed to USB Driver Installation Part 2 to configure IP
properties on the USB PC.
USB Driver Installation Part 2. Configuring IP properties on the
USB PC. Now that the USB driver installation is complete, you must
configure the USB PC so that its IP properties place it in the same
subnet as the Hurricane 9200/S’s USB port. There are two ways to
do this:
The Hurricane 9200/S is configured to assign an
appropriate IP address to the USB PC. If you want to use
this automatic assignment feature, called “DHCP server,”
you must configure the USB PC to accept dynamically
assigned IP information. Follow the instruction on pages 20
through 24 that correspond to the operating system
installed on your PC.
If you want to assign a static IP address to the PC, follow
the instructions on page 25 and use the following
information:
o
In the Network and Dial-up Connections window, be
sure to select the icon that corresponds to your new
USB connection (not the one that corresponds to your
Ethernet NIC). When you display properties for the
icon, the following text should display in the Connect
Using text box:
PROLiNK H9200 USB LAN Modem #n
o
The USB interface on the Hurricane 9200/S is
preconfigured with these properties:
USB interface IP address:
192.168.1.2
USB interface subnet mask: 255.255.255.0
Therefore, your PC must be configured as follows:
IP address:
192.168.1.n where n is a
number from 3 to 254.
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.2