CLEANING AND MAINTENANCE
Do not use abrasive cleaning agents or solvents.
1. Set the temperature control knob to the 0 position and unplug the appliance from the mains socket.
2. Take out the food and store in a cool location.
3. Clean the appliance with a soft cloth, warm water and detergent.
4. Wipe the door seal with clear water only and then wipe dry thoroughly.
5. After cleaning, reconnect and adjust the temperature as desired.
6. Put the food back into the appliance.
The LED lights in the fridge compartment cannot be replaced by the user. If the LED lights stop working,
please contact the local authorised service agent.
TROUBLESHOOTING
If there is a problem with your appliance, please check the following points before contacting customer
service.
Problem
Possible causes
Possible solution
Appliance does
not operate.
No electricity at power outlet.
Check that the plug is correctly connected
and power switched on.
Appliance is
noisy.
Cabinet not stable or level.
See “Installation” section.
Appliance not
cool
Temperature setting not correct.
Frequent door openings.
Large amount of food recently
added.
See “Temperature Control” section.
Minimise door openings to allow
temperatures to stabilise.
Downloaded from www.vandenborre.be
