Proline PCI300G-E-2, Инструкция пользователя

Страница: 13 / 60

EN - 12 -
Replacing the Refrigerator Light Bulb
1. Unplug the unit from the power supply,
2. Remove the refrigerator light cover (A) by
pressing the hooks placed on both sides of the
cover.
3. Change the light bulb (B) with a new one (E14,
no more than 15 W).
4. Replace the light cover and plug the unit.
• Original package and foam may be kept for re-transportation.
• During transportation, the appliance should be empty and its doors should be closed.
• You should fasten your fridge with thick package, bands or strong cords and follow the
instructions for transportation on the package.
• Remove movable parts (shelves, accessories, crisp, etc.) or fi x them into the fridge
against shocks using bands during re-positioning and transportation.
• Carry your fridge in the upright position.
SHIPMENT AND REPOSITIONING PART - 6.
Your appliance uses R600a as a refrigerant. Therefore you should be careful during
shipment and installation to prevent your appliance’s cooler elements from being damaged.
Although R600a is an environmentally friendly and natural gas, it is explosive. In the event of
a leak caused by damage to the cooler elements, move your fridge from open fl ame or heat
sources and ventilate the room where the appliance is located for a few minutes.
Downloaded from www.vandenborre.be