6
ELECTRICAL CONNECTION:
Installation must be carried out according to the manufacturer's instructions. Incorrect
installation may cause harm and damage to people, animals or property, for which the
manufacturer accepts no responsibility.
Before carrying out any work on the electrical section of the appliance, it must be
disconnected from the mains.
Connection to a good earth wiring system is absolutely essential.
The manufacturer accepts no responsibility for any inconvenience caused by failure
to comply with this rule.
The hob must be installed by a qualified electrician in line with all electrical and
installation requirements published by the Institute of Electrical Engineers. We
recommend that the appliance is connected by a qualified electrician, who is a
member of the N.l.C.E l C. and who will comply with the l.E.E. and local regulations.
Before carrying out the connection to the power supply, the voltage rating of the
appliance (stamped on the appliance identification plate) must be checked for
correspondence to the available mains supply voltage, and the mains electric wiring
should be capable of handling the appliance’s power rating (also indicated on the
identification plate).
This appliance must be connected by a competent person, using fixed wiring via a
DOUBLE POLE SWITCHED FUSED SPUR OUTLET (with 3 mm minimum distance
between the contacts).
A double pole switch must be provided no further than 2 metres from the appliance
to the electrical supply. All supply current and earth conductors must be able to
withstand an ambient temperature of 75°C.
After having installed the appliance, the power switch must always be in a accessible
position. Use a 35 AMP fuse
The wires in the mains lead are coloured in accordance with the following code:
Green & Yellow = Earth Blue & Grey = Neutral Brown & Black= Live.
As the colours of the wires in the mains lead for the appliance, may not correspond with
the coloured markings identifying the terminals in your spur box, proceed as follows:
1) The wire which is coloured green and yellow must be connected to the terminal
marked E (Earth) or or Green coloured.
2) The wire which is coloured blue must be connected to the terminal marked N
(Neutral), or coloured Grey.
3) The wire which is coloured brown must be connected to the terminal marked L
(Live), or coloured Black.
