ProLights Z1200WASH, Руководство пользователя

Страница: 43 / 60

13
Z1200WASH
3.4 DMX MODE
• Enter MENU mode, select [ DMX Functions ] and confirm with ENTER button.
• Use JOG WHEEL to select [ DMX Address ].
• Press ENTER button to confirm.
• Use jog wheel to adjust the address from [ 1 ] to [ 512 ].
• Press ENTER button to confirm.
• Press MENU button back to the last menu or idling one minute to exit menu mode.
3.5 DMX ADDRESSING
To able to operate the Z1200WASH with a light controller, adjust the DMX start address for the first a DMX
channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX channel,
adjust the start address 33 on the Z1200WASH. The other functions of the light effect panel are then auto-
matically assigned to the following addresses. An example with the start address 33 is shown below:
Z1200WASH is equipped with 3 DMX channel mode: 16 Ch (Mode1) and 21 Ch (Mode2, Mode3).
• Enter MENU mode, select [ DMX Functions ] and confirm with ENTER button.
• Use JOG WHEEL to select [ DMX Channel Mode ].
• Press ENTER button to confirm.
• Use JOG WHEEL to select [ Mode1(16) ], [ Mode2(21) ] or [ Mode3(21) ].
• Press ENTER button to confirm.
• The table on page 15 indicate the operating mode and DMX value. The Z1200WASH is equipped with
3-pole and 5-pole XLR connections.
3.6 VIEW DMX VALUE
Used for displaying DMX value of projector.
• Enter MENU mode, select [ DMX Functions ] and confirm with ENTER button.
• Use JOG WHEEL to select [ View DMX Value ].
• Press ENTER button to confirm.
• Use JOG WHEEL to view other DMX value.
• Press MENU button back to the last menu or idling one minute to exit menu mode.
Number of
DMX channels
Start address
(example)
DMX Address
occupied
Next possible start
address for unit No. 1
Next possible start
address for unit No. 2
Next possible start
address for unit No. 3
16 33 33-48 49 65 81
21 33 33-53 54 75 96