ProLights SUNBLAST3000FC страница 51 Скачать руководство пользователя

Страница: 51 / 56

SUNBLAST 3000 FC

3.11 CONNECTION OF THE DMX LINE

DMX connection employs standard XLR connectors. Use shielded pair-twisted cables with 120Ω imped-

ance and low capacity.

The following diagram shows the connection mode:

ATTENTION

The screened parts of the cable (sleeve) must never be connected to the system’s earth, as this would

cause faulty fixture and controller operation.

Over long runs can be necessary to insert a DMX level matching amplifier.

For those connections the use of balanced microphone cable is not recommended because it cannot

transmit control DMX data reliably.

• Connect the controller DMX input to the DMX output of the first unit.

• Connect the DMX output to the DMX input of the following unit. Connect again the output to the input

of the following unit until all the units are connected in chain.

• When the signal cable has to run longer distance is recommended to insert a DMX termination on the

last unit.

3.12 CONSTRUCTION OF THE DMX TERMINATION

The termination avoids the risk of DMX 512 signals being reflected back along the cable when they reach-

es the end of the line: under certain conditions and with certain cable lengths, this could cause them to

cancel the original signals.

The termination is prepared by soldering a 120Ω 1/4 W resistor between pins 2 and 3 of the 5-pin male XLR

connector, as shown in figure.

Fig.8

Esempio:

connettore XLR a 3 pin

Fig.7

DMX - OUTPUT

Presa XLR

DMX - INPUT

Spina XLR

Pin1 : Massa - Schermo

Pin2 : - Negativo

Pin3 : + Positivo

Pin4 : N/C

Pin5 : N/C

Содержание SUNBLAST3000FC

























































Результаты поиска

Содержание SUNBLAST3000FC

Отзывы:

Похожие инструкции для SUNBLAST3000FC

Бренды по названию

Популярные бренды

ProLights SUNBLAST3000FC, Руководство пользователя

Результаты поиска

Содержание SUNBLAST3000FC

Отзывы:

Похожие инструкции для SUNBLAST3000FC

Бренды по названию

Популярные бренды