ProLights SUNBLAST3000FC, Руководство пользователя

Страница: 39 / 56

11 SUNBLAST 3000 FC
Fig.5 - Example 19 DMX channels configuration
DMX Address: 96 DMX Address: 54 DMX Address: 33 DMX Address: 75
. . . . . . . . . . . .
DMX512 Controller
The tables on page 18 show the mode of operation and their values DMX.
The unit is equipped with 5-pole XLR connections.
DMX ADDRESSING
For operation via light control unit with DMX512 protocol, is sufficient connect the controller to SUN-
BLAST3000FC. To able to operate the SUNBLAST3000FC with a light controller, adjust the DMX start ad-
dress for the first a DMX channel. If e. g. address 33 on the controller is provided for controlling the func-
tion of the first DMX channel, adjust the start address 33 on the SUNBLAST3000FC. The other functions of
the light effect panel are then automatically assigned to the following addresses.
An example with the start address 33 is shown below:
ETHERNET
To enable Artnet mode, proceed as follows:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Connect icon, then press the ENTER button to
enter the next menu
Ethernet
.
• Press the UP/DOWN button to scroll through the menu, select Protocol, Universe, Start Channel, IP Address ,
Ethernet to DMX and press ENTER to activate the mode.