ProLights SmartBook, Руководство пользователя

Страница: 13 / 40

11 SMARTBOOK
3.5 DMX CONFIGURATION
SMARTBOOK has several DMX channel configurations that can be accessed from the control panel.
• Press the MENU button until CONNECT shows on the display, next throught UP/DOWN buttons select DMX
MODE , then press the ENTER button.
• Throught the UP/DOWN buttons select the DMX configuration desidered ( 4CH - 6CH- 10CH ). Press the
ENTER button to confirm.
The table on page 10 indicate the operating mode and DMX value.
3.6 WIRELESS SETTING
To enter the wireless setting mode press the MODE button until CONNECT shows on the display , next select
WIRELESS
, then press the ENTER button.
• Select the
WIRELESS RECEIVE
function using the UP/DOWN, then press the ENTER button.
• To activate the WIRELESS reception mode , use the UP/DOWN button and select the On option.
• Press the ENTER button to confirm your choice.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.
• NOTE - Once you have completed these steps, you must synchronize with any wifi unit you want to
communicate with by pressing the sync button on it. Then connect any DMX console to the wifi drive
to open communication with SMARTBOOK.
• To reset the unit, use the UP/DOWN buttons to select the Wireless Reset function, next press the ENTER
button, then use the UP/DOWN buttons to select the Yes option and press the button ENTER to confirm
your choice.
3.7 IR SETUP
To start up the IR recevitor refer to the following steps:
• Press the MENU button so many times until the display shows [ IR Setup].
• Press the ENTER button to confirm.
• Press the UP/DOWN button, select one of the programs [ ON] or [OFF].
• Press the ENTER button for save the setting.
NOTE - Make sure to point the controller directly at the receiver on the prod-
uct (if DMX mode is on, it could be necessary activate static mode or auto
program mode to unlock the block).
3.8 BACK LIGHT
To adjust the time of the backlight display, press the MENU button so many
times until SETUP shows on the display, press the ENTER button on SCREEN
and select, throught the UP/DOWN button,
BACK LIGHT
, then press the ENTER
button.
• Press the UP/DOWN button to select (ON - 10s - 20s - 30s) .
• Press ENTER button to confirm your choiche.
• Press the MENU button to go back or to meet the waiting time to exit from the setup menu automati-
cally.
3. 9 FLIP DISPLAY
To turn 180° the display, press the MENU button so many times until SETUP shows on the display, press
the ENTER button on SCREEN and select, throught the UP/DOWN button, FLIP DISPLAY , then press the ENTER
button.
• Press the UP/DOWN button to select (No - Yes) .
• Press ENTER button to confirm your choiche.
• Press the MENU button to go back or to meet the waiting time to exit from the setup menu automati-
cally.
FADE
SOUND SENSIT.
AUTO
MACRO
POWER
STROBE SPEED DIMMER MANUAL
AMBER
UV
RED YELLOW
CYAN
MAGENTA
STATIC
DEEP
ORANGE
LIGHT
ORANGE
SEA
GREEN
AQUA
MARINE
WARM
WHITE
COLD
WHITE
GREEN
BLUE VIOLET PURPLE
WHITE