ProLights POLAR500, Руководство пользователя

Страница: 28 / 40

POLAR500
10
• Press the button UP/DOWN to select the desider value
(001 - 512),
then press the button ENTER to con-
firm.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.
The tables on page 12 indicate the operating mode and DMX value. The POLAR500 is equipped with
3-pole XLR connections.
3.11 DMX ADDRESSING
To able to operate the POLAR500 with a light controller, adjust the DMX start address for the first a DMX
channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX
channel, adjust the start address 33 on the POLAR500. The other functions of the light effect panel are
then automatically assigned to the following addresses.
An example with the start address 33 is shown below:
Number of
DMX channels
Start address
(example)
DMX Address
occupied
Next possible start
address for unit No. 1
Next possible start
address for unit No. 2
Next possible start
address for unit No. 3
8 33 33-40 41 49 57
Fig.5 - Example 8 DMX channels configuration
DMX Address: 33 DMX Address: 57 DMX Address: 41 DMX Address: 49
DMX512 Controller
. . . . . . . . . . . .
3.12 UNIT TEMPERATURE
Through the tEMP function you can display the temperature of the projector.
• Press the MENU button so many times until the display shows tEMP , then press the button ENTER.