MOBY40
20
3.14 STATIC CONFIGURATION
To set the custom balance of red, blue and green:
•
Press the button MENU, then press the button UP/DOWN so many times until the display shows
[STAT]
.
Press the button ENTER to confirm.
•
Select the color red, green or blue
(RED - GREN -BLUE- AMBR)
through the buttons UP and DOWN and then
press the button ENTER.
•
Set the value
(000 - 255)
, through the buttons UP/DOWN.
•
Set the value of the
[STRB]
tra
(0 - 20)
through the buttons UP/DOWN.
3.15 EDITING CUSTOM PROGRAMS
To set the custom balance of red, blue and green:
•
Press the button MENU, then press the button UP/DOWN so many times until the display shows
[EDIT]
.
Press the button ENTER to confirm.
•
Select the program
PR.01 - PR.10
.
•
Each custom program has 30 steps that can be edited.
•
Each step allows the creation of a scene using red
(RED)
, green
(GREEN)
, blue
(BLUE)
, amber
(AMBR)
,
(STRB)
,
(TIME)
and
(FADE)
.
•
Set the value
(000 - 255)
, through the buttons UP/DOWN.
3.16 SPECIAL FUNCTIONS
Press the button MENU and select through the directional buttons the
[SETTINGS]
mode; and press the but-
ton ENTER to confirm.
It is possible to view to following functions:
KEY
This menu allows the user to adjust key operation settings for this fixture. Select [
ON
] for automatic lock
out. Password to re-enter the display is UP + DOWN + UP + DOWN
UPLD
•
Select
[UPLD]
to upload the custom programs from the current Master unit to the Slave units.
•
In order to activate the upload function the password must be entered. Password is the same as the
main access password.
•
When uploading the Master and Slave units will display yellow.
•
If an error occurs when uploading the Master and/or Slave units will display red.
•
On successful uploading of the custom programs the Master and Slave units will display green.
REST
•
In order to reset custom modesto default values select
[REST]
.
COLOR
•
[COLOR]
is for activate/deactivate the color calibration functions.
- When
[RGBW]
is selected, on RGB =255, 255, 255 the color is displayed as calibrated in CAL2
(RGBW).
- When
[COLOR]
is set
[OFF]
, on RGB =255, 255, 255 the RGB values are not adjusted and the output
is most powerful.
- When
[UC]
is selected, the RGB output adjusted to a standard preset universal color which
balances fixtures from different generations.
Содержание MOBY40
