ProLights MOBY40, Руководство пользователя

Страница: 44 / 60

MOBY40
14
Number of
DMX channels
Start address
(example)
DMX Address
occupied
Next possible start
address for unit No. 1
Next possible start
address for unit No. 2
Next possible start
address for unit No. 3
12 33 33-44 45 57 69
3.8 DMX CONFIGURATIONS
MOBY40 is equipped with 8 DMX configuration.
• Press the button MENU, then press the button UP/DOWN so many times until the display shows [PERS] .
Press the button ENTER to confirm.
• Select the desired DMX configuration (TOUR - TR16 - ARC.1 - AR1.D - ARC.2 - AR2.D - AR2.S - HSV) through the
buttons UP/DOWN.
The tables on page 16 indicate the operating mode and DMX value. The MOBY40 is equipped with 3-pole
XLR connections.
3.9 DMX MODE
• Press the button MENU, then press the button UP/DOWN so many times until the display shows [RUN] .
Press the button ENTER to confirm.
• Press the buttons UP/DOWN to select [DMX] mode.
• Then enter the [ADDR] mode to set the ID address.
• Press the buttons UP/DOWN to select the desired value
(001-512
).
• After the setting value is automatically saved.
3.10 ADJUSTING THE START ADDRESS
To able to operate the MOBY40 with a light controller, adjust the DMX start address for the first a DMX
channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX chan-
nel, adjust the start address 33 on the MOBY40. The other functions of the light effect panel are then
automatically assigned to the following addresses.
An example with the start address 33 is shown below:
DMX Address: 33 DMX Address: 69 DMX Address: 45 DMX Address: 57
DMX512 Controller
. . . . . . . . . . . .
Fig.11
Example 12 DMX channels configuration