LUMIPIX6Q
16
•
Press the button MENU so many times until shows [
AUTO TEST]
.
•
To confirm and start the automatic test press the ENTER button.
Manual Test
Allows you to adjust effects from the control panel to obtain perfect uniformity between the projec-
tors.
•
Press the button MENU so many times until shows [
MANUAL TEST]
, then press the ENTER button to
confirm the choice.
•
Select the parameter to be changed between [
R - G - B -W - D - S]
and press the ENTER button to con-
firm the choice.
•
Set the desired parameter value between the [
0 - 255
] range using the UP/DOWN buttons and press
the ENTER button to confirm the setting.
•
Press the MENU button to go back or to meet the waiting time to exit from the setup menu auto-
matically.
3.16 FIXTURE INFORMATION
Fixture Time
Show the fixture working hours.
•
Press the button MENU so many times until shows [
FIXTURE TIME]
•
Then the display will show the working hours.
•
Press the MENU button to go back or to meet the waiting time to exit from the setup menu auto-
matically
Firmware Version
Show the fixture firmware version.
•
Select through the directional buttons the
[VERSION]
menu voice.
•
The display will show the firmware data.
•
Press the MENU button to go back or to meet the waiting time to exit from the setup menu auto-
matically
3.17 RESET FUNCTION
Factory Settings
•
Press the button MENU so many times until shows [
FACTORY SETTINGS]
, then press the ENTER button
to confirm the choice.
•
Select [
YES]
to restore the unit to the factory settings.
Reset
•
Press the button MENU so many times until shows [
RESET]
, then press the ENTER button to confirm.
•
Select [
YES]
to reset the default values.
REMARKS
Press ENTER go to CODE mode:
•
Input 70, press ENTER for factory setting.
•
Input 80, press ENTER to clear the fixture’s time.
