11
LUMIPIX6Q
DMX512 Controller
DMX Address: 33
DMX Address: 57
DMX Address: 41
DMX Address: 49
. . . . . . . . . . . .
Example 8 DMX channels configuration
Fig.5
3.8 DMX CONFIGURATION
LUMIPIX6Q is equipped with different DMX configuration.
•
Press the button MENU so many times until shows
[DMX CHANNEL]
, and press the button ENTER to con-
firm.
•
Select the desired DMX configuration (
4CH - 6CH - 8CH - 24CH
) through the buttons UP/DOWN.
The tables on page 13 indicate the operating mode and DMX value. The LUMIPIX6Q is equipped with
3-pole XLR connections.
3.9 DMX MODE
•
Press the button MENU so many times until the display shows
[DMX ADDRESS]
, and press the button EN-
TER to confirm.
•
Press UP/DOWN button to select the desired value (
001-512
). Press and hold to scroll quickly.
•
Press ENTER button to store.
•
Press the MENU button to go back or to meet the waiting time to exit the setup menu.
To able to operate the LUMIPIX6Q with a light controller, adjust the DMX start address for the first a DMX
channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX
channel, adjust the start address 33 on the LUMIPIX6Q. The other functions of the light effect panel are
then automatically assigned to the following addresses.
An example with the start address 33 is shown below:
Number of
DMX channels
Start address
(example)
DMX Address
occupied
Next possible start
address for unit No. 1
Next possible start
address for unit No. 2
Next possible start
address for unit No. 3
4
33
33-36
37
41
45
6
33
33-38
39
45
51
8
33
33-40
41
49
57
24
33
33-56
57
81
105
