15
LUMIPIX6Q
3.13 FIXTURE SETTINGS
It is possible to change the parameter value in the following way:
Dimmer
•
Enter in Dimmer mode to select specific dimming curve, press the button MENU so many times
until shows [
DIMMER MODE]
, and press the button ENTER to confirm.
•
Press the button UP/DOWN to select [
MODE 1 - MODE2 - MODE3].
•
Press ENTER button to store.
•
Press the MENU button to go back or to meet the waiting time to exit the setup menu.
Standby
•
To activate Blackout function, press the button MENU so many times until shows [
STANDBY]
, and
press the button ENTER to confirm.
•
Press the button UP/DOWN to select [
YES].
•
Press ENTER button to confirm.
•
Press the MENU button to go back or to meet the waiting time to exit the setup menu.
Back Light
•
To activate Backlight display press the button MENU so many times until shows [
BACK LIGHT]
, and
press the button ENTER to confirm.
•
Press the button UP/DOWN to select [
ALL - 10S - 20S - 30S].
•
Press ENTER button to confirm the selection.
•
Press the MENU button to go back or to meet the waiting time to exit from the setup menu auto-
matically.
Back Dimmer
•
To activate Backlight intensity, press the button MENU so many times until shows [
BACK DIMMER]
, and
press the button ENTER to confirm.
•
Press the button UP/DOWN to select the value [
0 - 100].
•
Press ENTER button to confirm the selection.
•
Press the MENU button to go back or to meet the waiting time to exit from the setup menu auto-
matically.
3.14 WHITE CALIBRATION
Enter the White balance to adjust the RGB parameter to make different whites.
•
Press the button MENU so many times until shows
[WHITE BALANCE]
, and press the button ENTER to con-
firm.
•
Select red, green or blue (
R - G - B
), through the buttons UP/DOWN.
•
Press MENU button to confirm.
•
Set the value
000-255
, through the buttons UP/DOWN.
•
Press the MENU button to go back or to meet the waiting time to exit from the setup menu automati-
cally.
3.15 FIXTURE TEST
Auto Test
Allow checking the proper functioning of the unit. Start the automatic test in the following way:
