15
LUMipAR7QTOUR
3.13 FIXTURE SETTINGS
It is possible to change the parameter value in the following way:
Dimmer
•
Enter in Dimmer mode to select specific dimming curve, press the button MENU so many times
until shows
Dimmer Mode
, and press the button ENTER to confirm.
•
Press the button UP/DOWN to select
Off - Dimmer 1 - Dimmer 2 - Dimmer 3.
•
Press ENTER button to store.
•
Press the MENU button to go back or to meet the waiting time to exit the setup menu.
BackLite
•
To activate Backlight display press the button MENU so many times until shows
Back Light
, and press
the button ENTER to confirm.
•
Press the button UP/DOWN to select
On - 10S - 20S - 30S.
•
Press ENTER button to confirm the selection.
•
Press the MENU button to go back or to meet the waiting time to exit from the setup menu auto-
matically.
LED Frequency
•
To adjust the frequency of the LEDs, press the MENU button repeatedly until the display shows
LED
Frequency,
and then press the ENTER button.
•
Select the frequency
(600 Hz - 25 kHz)
using the UP/DOWN buttons.
•
To confirm, press the ENTER key.
•
Press the MENU button to go back or wait a few seconds to exit the setup menu.
3.14 FIXTURE INFORMATION
Auto Test
Allow checking the proper functioning of the unit. Start the automatic test in the following way:
•
Press the button MENU so many times until shows
Information
, then press the ENTER button to confirm.
•
Using the button UP/DOWN to select
Auto Test
.
•
To confirm and start the automatic test press the ENTER button.
Fixture Hours
Show the fixture working hours.
•
Press the button MENU so many times until shows
Information.
Press the button ENTER to confirm
•
Using the button UP/DOWN to select
Fixture Hours,
then press the button ENTER to confirm
•
Then the display will show the working hours.
•
Press the MENU button to go back or to meet the waiting time to exit from the setup menu auto-
matically
Version
Show the fixture firmware version.
•
Press the button MENU so many times until shows
Information
•
Select through the button UP/DOWN the
Version
menu voice.
•
The display will show the firmware data.
•
Press the MENU button to go back or to meet the waiting time to exit from the setup menu automatically.
Содержание LUMIPAR7QTOUR
