LUMI4TRI
12
- 4 - FOOTSWITCH OPERATION
4.1 FOOTSWITCH FUNCTIONS
The included footswitch provides quick access to preset colors, color change programs, and triggering via
the on board microphone on the LUMI4TRI. Please see the chart, along with the set of instructions, below
for further explanation.
•
Power on the fixture.
•
Connect the footswitch to the LUMI4TRI via the 4-pin connection cable with plug.
•
Press pedal # 1 (Preset) to activate control. When this is operating properly, the LEDs on the LUMI4TRI
will light white (first function on pedal # 1).
In order to properly disconnect the footswitch, please follow these steps:
•
Unplug the footswitch from the LUMI4TRI.
•
Turn the power to the fixture off (unplug the power cable).
•
Turn the power to the fixture on again (plug in the power cable), and the fixture will properly operate
on any one of the 3 modes.
NOTE - There is no need to modify any settings for the LUMI4TRI before connecting the footswitch. It will
operate properly in any mode.
PEDAL
SUB-OPTION
FUNCTION
1
PRESET
1xPress
2xPress
3xPress
4xPress
5xPress
6xPress
7xPress
8xPress
9xPress
WHITE
RED
GREEN
BLUE
CYAN
YELLOW
VIOLET
Color change every second in a continuous loop
Color change every three seconds in a continuous loop
2
SOUND ON
1xPress
SOUND CONTROLLED
3
BLACKOUT
1xPress
BLACKOUT
