ProLights LUMI4TRI, Руководство пользователя

Страница: 25 / 36

9
LUMI4TRI
3.6 PRESET COLOR
This fixture has preprogrammed, static looks that may be triggered without a controller. Access these
chases via the control panel on the back of the fixture.
• Remove any DMX controller from the fixture.
• Press MENU button to select Static Color mode [C--] .
• Press ENTER.
• Using UP/DOWN button, select one of the seven presets.
• Press ENTER button to confirm.
3.7 CUSTOM COLOR
This fixture has the ability to accept custom static color settings. Access this via the control panel.
• Press MENU button until
[U--]
appears on the LED screen.
• Press ENTER button.
• Using UP/DOWN button, select the desired color.
• Press ENTER button.
• Using UP/DOWN button, select the desired color value [001 - 100] . By selecting 000 , the color will remain off.
• Press ENTER button to continue to the next color
(R, G, b)
.
• Using UP/DOWN button, select the desired color value [001 - 100] .
• Continue until the desired mix is obtained. The order of colors is red, green, and blue.
3.8 MASTER/SLAVE MODE
This mode will allow for multiple LUMI4TRI to be controlled with a single footswitch. This mode allows
a single unit, the master, to operate in one of the standalone modes, while one or more fixtures, slaves,
synchronize their responses to the master.
MASTER SETTINGS
• Connect the fixtures with DMX cables.
• Use any one of the standalone modes for the master unit.
SLAVE SETTINGS
• Press the button MENU so many times until the display shows [512] , then press the button ENTER.
• Set the DMX starting address of the Slave(s) to [001] .
3.9 LINKING
Several units may be interconnected in order to control all further slave units to the same effect of the
master unit.
1. Connect the DMX OUT of the master unit via 3-pole XLR cable to the DMX IN of the first slave unit.
2. Connect the DMX OUT of the first slave unit to the DMX IN of the second slave unit, etc. until all units
are connected in a chain.
3.10 DMX OPERATION
• Press the button
[MENU]
so many times until shows
[512]
, and press the button ENTER to confirm.
• Press the button UP/DOWN to select the desired DMX address [d001 - d512] .
• Press ENTER to confirm.
3.11 DMX ADDRESSING
To able to operate the LUMI4TRI with a light controller, adjust the DMX start address for the first a DMX
channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX chan-