ProLights Halurock, Руководство пользователя

Страница: 47 / 56

21
hALURoCK
3.15 RESET FUNCTION
• Press the button MENU to enter the menu mode. Use the buttons UP/DOWN to select the Reset Setup
item. Press the button ENTER to reset the projector.
3.16 FIXTURE INFORMATION
• Press the button MENU to enter the menu mode. Use the buttons UP/DOWN to select the Information
item. Press the button ENTER to confirm.
• Select the desired parameter using the UP/DOWN button and press the ENTER button to confirm the
setting.
-
IP Address -
Through the function
IP Address
can be displayed on the display the IP address of the unit.
- Device ID - Through the function Device ID can be displayed on the display the ID of the unit.
- Temperature - Through the function Temperature can be displayed on the display the temperature of
the device in ° C. When the temperature is under 60°C, the fixture will work normally; when it’s
between 65°C and 75°C, the fixture will reduce the power output; when it reach 75°C or higher, the
LED display will be OFF.
- Fixture Time - Through the Fixture Time function you can display the operating time of the projector.
- Software Version - Select Software Version , press ENTER button to confirm, firmware version will show on
the display.
• Press MENU button back to the last menu or let the unit idle one minute to exit menu mode.