hALURoCK
20
menu.
-
Display Inverse
- Used for reversing display. Select
Display Inverse
, press ENTER button to confirm, present
mode will blink on the display, use UP/DOWN button to select
No
(normal display) or
Yes
(inverse dis-
play), press ENTER button to store.
-
Warn Cue
- Select
Warn Cue
, press ENTER button to confirm, present mode will blink on the display, use
UP/DOWN button to select
No
(Normal) or
Yes
(display will show the error warning when the unit
went wrong).
• Press MENU button back to the last menu or let the unit idle one minute to exit menu mode.
3.13 SYSTEM SETTING
• Press the button MENU to enter the menu mode. Use the buttons UP/DOWN to select the
System Setup
item. Press the button ENTER to confirm.
• Select the desired parameter using the UP/DOWN button and press the ENTER button to confirm the
setting.
-
Dimmer Mode
- Adjusting the dimmer. Enter in
Dimmer Mode
to select specific dimming curve.
Particularly when set:
•
Off:
The increase in light intensity is linear
•
Dimmer 1:
Light intensity control is finger at low levels and coarse at high levels.
•
Dimmer 2:
Light intensity control is finger at high levels and coarse at low levels.
•
Dimmer 3:
Light intensity control is finger at low levels and high levels and coarse at medium levels.
-
Temperature Unit
- Select
Temperature Unit
, press ENTER button to confirm, present mode will blink on
the display, use UP/DOWN button to select °C or °F, press ENTER button to store.
-
Fan Mode
- Fan speed. Select the desired fan speed
High Speed
or
Auto Speed
through the button UP/
DOWN.
-
Factory Settings
-
Factory reset. Select
Factory Settings
function and then
Yes
to restore all values to the
original factory settings.
• Press MENU button back to the last menu or let the unit idle one minute to exit menu mode.
3.14 FIXTURE TEST
Auto Test
Allow checking the proper functioning of the unit. Start the automatic test in the following way:
• Press the button MENU to enter the menu mode. Use the buttons UP/DOWN to select the
Test Setup
item.
Press the button ENTER to confirm.
• Press the buttons UP/DOWN to select the
Auto Test
item.
• To confirm and start the automatic test press the ENTER button.
Manual Test
Allows you to adjust effects from the control panel to obtain perfect uniformity between the projectors.
• Press the button MENU to enter the menu mode. Use the buttons UP/DOWN to select the
Test Setup
item.
Press the button ENTER to confirm.
• Press the buttons UP/DOWN to select the
Manual Test
item. Then press the button ENTER.
• Select the parameter to be changed between (
Pan, Pan Fine, Tilt, Tilt Fine, P/T Speed, Dimmer, Shutter)
and press
the ENTER button to confirm the choice.
• Set the desired parameter value between the
0 - 255
range using the UP/DOWN buttons and press the
ENTER button to confirm the setting.
• Press MENU button back to the last menu or let the unit idle one minute to exit menu mode.
Содержание Halurock
