GHOST GH080F
8
2.5 QUICK START MODE
If the “QUICK START” mode is activated, the GHOST GH080F will call the operating mode of the previous
operation when it is turned on. For instance, if timer mode was selected last, the machine will be directly
in timer mode after the warm-up process is completed.
Press the button FUNCTION until the display indicates QUICK START ON. Use the buttons UP/DOWN to
deactivate the quick start mode (indication QUICK START OFF) and to reactivate it (indication QUICK START
ON)
2.6 DMX MODE
When the LCD panel display “READY TO FAZER”, press the FUNCTION button and select
DMX512
mode. Un-
der this mode, user can use either the UP/DOWN button will be able to set the DMX address. The GHOST
GH080F fazer machine provide two channels one for the fan and the other is for fog output.
2.7 ADJUSTING THE START ADDRESS
To able to operate the GHOST GH080F with a controller, adjust the DMX start address for first DMX chan-
nel. If e.g. address 33 on the controller is provided for controlling the function of the first DMX channel,
adjust the start address 33 on the GHOST GH080F. The other functions of the light effect panel are then
automatically assigned to the following addresses.
An example with the start address 33 is shown below:
Number of
DMX channels
Start address
(example)
DMX Address
occupied
Next possible start
address for unit No. 1
Next possible start
address for unit No. 2
Next possible start
address for unit No. 3
2
33
33-34
35
37
39
CH Function in 2 channel mode
Value
1
SMOKE OUTPUT
No function
Smoke 2-100%
000 - 005
006 - 255
2
SPEED CONTROL
Speed Fans 20% - 100%
000 - 255
