ProLights EclProfile FW IP, Руководство пользователя

Страница: 20 / 40

PROLIGHTS - EclProfile
FW IP 18
Keys Mode Description
ENTER + MENU after power on Flip Display Directly flip display without enter inside menu.
UP + ENTER then power on Bootloader Force firmware upgrade.
12 - ERROR MESSAGES
11 - SHORTCUTS
Group Message Type Comment
Config "Not Calibrated" Error
Temperature sensor "Temp. Sensor failed" Warning Checksum error ROM
code
"T: Can't read ROM code" Error
"T: Can't get input" Error
"T: Can't read status" Error
Temperature management "Overtemperature" Error
"LED Temperature" Error Cannot read LED tem -
perature
Transfer config "DMX active" Error Cannot transfer with active
DMX
Flash memory "Initializing Flash" Information
"Invalid flash entry" Warning
"Can't unlock flash (WR)" Error
"Can't unlock flash (ER)" Error
"Can't lock flash" Error
"Can't load Pg1" Error
"Can't load Pg2" Error
"Can't load flash" Error
Gobo Rot. "Gobo position lost" Warning Refernce signal at unex -
pected position
"Gobo ref. disabled" Information Use of reference position
automatically disabled
after referencing failed