ProLights CYBER192 Скачать руководство пользователя страница 34

Страница: 34 / 44

CYBER 192

- 6 - PLAYBACK

Playback (Scenes)

6.1 MANUAL RUN SCENE

When power is first turned ON, the controller will be in manual scene mode.

1. Make sure neither MUSIC TRIGGER nor AUTO TRIGGER LED’s on the LED display are on.

2. Select the program BANK that stores the scene you want to run manually by using the

[BANK UP]/ [BANK

DOWN]

3. Press the

SCENE

button to run.

NOTE - If you are in programming mode you can also press and hold the PROGRAM button until the Pro-

gram LED goes off.

6.2 RUNNING IN SOUND-MODE

In the Sound mode, programs will be triggered by the sound using its built-in microphone. All scenes in

a Bank will chase.

1. Press the

[MUSIC/BANK COPY]

button until the MUSIC TRIGGER LED turns on.

2. Change BANK programs by using

[BANK UP]/ [BANK DOWN]

buttons if necessary.

3. Press the

[MUSIC/BANK COPY]

to exit.

6.3 RUNNING IN AUTO-MODE

In the Auto mode, programs will be triggered by controllers fade and speed time as set on the faders. All

scenes in a Bank will chase.

1. Press and hold the

[AUTO/DEL]

button until the AUTO TRIGGER LED turns on.

2. Change BANK programs by using

[BANK UP]/ [BANK DOWN]

buttons if necessary.

3. You can override the time between steps by moving the

SPEED

fader and the fade time of the step by

moving the

FADE TIME

fader. To revert to the programmed values, press the

[PROGRAM]

button once.

4. You can change Banks while in operation by using the

[BANK UP]/ [BANK DOWN]

buttons.

NOTE - A Chase can contain 240 scenes as steps. The term steps and scenes are used interchangeably.

6.4 BLACKOUT

The Blackout button brings all lighting output to 0 or off (also called the home position of the unit).

Playback (Chases)

6.5 MANUAL RUN CHASES

This function allows the user to manually step through each individual step in a chase.

1. Press and hold

[PROGRAM]

button for 3 seconds to enter programming mode.

2. Start a chase by pressing any one of the CHASE buttons.

3. Press the

TAPSYNC/DISPLAY

button to manually step through the chase.

4. Use the

BANK

buttons to scroll through the chases.

5. Press and hold the

[PROGRAM]

button for 3 seconds to exit programming mode.

Содержание CYBER192













































Результаты поиска

Содержание CYBER192

Отзывы:

Похожие инструкции для CYBER192

Бренды по названию

Популярные бренды

ProLights CYBER192, Руководство пользователя

Результаты поиска

Содержание CYBER192

Отзывы:

Похожие инструкции для CYBER192

Бренды по названию

Популярные бренды