ProLights CYBER192, Руководство пользователя

Страница: 29 / 44

9
CYBER 192
4. Press and hold
[FIXTURES]
button # 1.
5. While holding button # 1 press [FIXTURES] button # 2.
6. While holding [FIXTURES] buttons # 1 and # 2, press and hold MIDI/ADD button.
7. Release [FIXTURES] button # 1 first before releasing [FIXTURES] button # 2.
8. Release [MIDI/ADD] button.
9. All FIXTURE LED indicators will flash to confirm successful copy.
10. Press and hold [PROGRAM] & [TAP SYNC] buttons times to exit mode.
3.4 FADE TIME ASSIGN (Optional Setup)
You can choose whether the board’s fade time during scene execution is implemented broadly to all out-
put channels or only to the Pan and Tilt movement channels. This is relevant because often you will want
gobos and colors to change quickly while not affecting the movement of the light.
1. Turn OFF the controller.
2. Hold the [BLACKOUT] and [TAP SYNC] buttons simultaneously.
3. Turn ON the controller.
4. Press the [TAP SYNC] button to toggle between the two modes. Either all channels (A) or select channel
Pan & Tilt only (P)
5. Press [BLACKOUT] and [TAP SYNC] to save settings. All LED’s will blink to confirm.