ProLights CUBER128, Руководство пользователя

Страница: 28 / 36

CYBER 128
12
- 5 - PLAYBACK
5.1 MANUAL RUN CHASE
When power is first turned ON, the controller will be in manual scene mode.
1. Make sure neither “MUSIC TRIGGER” nor “AUTO TRIGGER” LED’s on the LED display are on.
2. Select the program
[CHASES]
button that stores the scene you want to run manually by using the
[STEP UP] and [STEP DOWN] .
NOTE - If you are in programming mode you can also press and hold the PROGRAM button until the Pro-
gram LED goes off.
5.2 RUNNING IN SOUND-MODE
In the Sound mode, programs will be triggered by the sound using its built-in microphone. All scenes in
a Bank will chase.
1. Press the [MUSIC/ADD] button until the “MUSIC TRIGGER” LED turns on.
2. Select the
[CHASES]
you wish to operate.
3. Press the [MUSIC/BANK-COPY] to exit.
5.3 RUNNING IN AUTO-MODE
In the Auto mode, programs will be triggered by controllers fade and speed time as set on the faders. All
scenes in a Bank will chase.
1. Press the [AUTO/DEL] button until the AUTO TRIGGER LED turns on.
2. Select the [CHASES] you wish to operate.
3. You can override the time between steps by moving the [SPEED] fader and the fade time of the step
by moving the
[FADE TIME]
fader. To revert to the programmed values, press the PROGRAM button
once.
4. You can change Banks while in operation by using the [STEP UP] and [STEP DOWN] buttons.
NOTE - The fade setting should never be slower than the speed setting or the scene will never complete
execution.
5.4 RUNNING SEQUENTIAL CHASES
1. Press either [AUTO/DEL] or [MUSIC/ADD] buttons to select the trigger mode.
2. Press the [CHASES] button for each chase you wish to playback.
3. Adjust the Chase speed by changing the
[SPEED]
fader.
NOTE - Chases must already be programmed.
The chases will run in the order they are pressed.