ProLights CUBER128, Руководство пользователя

Страница: 27 / 36

11
CYBER 128
3. Locate the step in the program by using the [STEP UP] and [STEP DOWN] buttons.
4. Press the [AUTO/DEL] button to delete the current step.
5. All FIXTURES LEDs will flash, indicating a successful delete of the step from the memory.
6. When you have finished deleting the steps, press & hold the [PROGRAM] button for 3 seconds to exit
the Program mode.
4.3 DELETE CHASE
1. Press the [PROGRAM] button for 3 seconds.
2. Press and hold the [AUTO/DEL] button while pressing the Chase you want to delete.
3. All LED’s will flash, indicating that the [CHASES] was successfully erased.
NOTE - This will erase all Steps in the Chase.
4.4 ADDING A STEP TO A CHASE
1. Press and hold the [PROGRAM] button for 3 seconds to enter programming mode.
2. Press the desired [CHASES] (1~6) button.
3. Use the [STEP UP] and [STEP DOWN] buttons to scroll through the chase and arrive at the step number
for which you would like to add a step to.
4. Select a [FIXTURES] button.
5. Adjust the Faders to the desired look on stage.
6. Press [MUSIC/ADD] button and one step number will be added after the previously displayed step
number. All FIXTURES LED indicators will flash to confirm successful copy.
7. Repeat steps 3~6 until all scenes have been added to the chase.
8. Press and hold the [PROGRAM] button for 3 seconds to exit programming mode.
4.5 DELETE A CHASE
1. Press and hold the [PROGRAM] button for 3 seconds to enter programming mode.
2. Press the [CHASES] button (1~6) to be deleted.
3. Press and hold the [AUTO/DEL] button and the respective [CHASES] button then release to delete the
chase. All LED’s will blink 3 times. All FIXTURES LED indicators will flash to confirm successful copy.
NOTE - Steps will remain programmed on the controller. Only the chase is affected.
4.2 DELETE A STEP
1. Press the [PROGRAM] button for 3 seconds.
2. Press the [CHASE] button (1~6) for the corresponding chase you wish to edit (fig.6).
Fig.6