13
CROMOBEAM260
DMX Address: 33
DMX Address: 60
DMX Address: 42
DMX Address: 51
Example 9 DMX channels configuration (BASIC mode)
Fig.6
DMX512 Controller
. . . . . . . . . . . .
3.10 DMX ADDRESSING
•
Press the button MENU so many times until the display shows
[ADDRESS]
, and press the button ENTER
to confirm.
•
Press UP/DOWN button to select the desired value (
001-512
).
•
After the setting value is automatically saved.
•
Press the MENU button to go back or wait some seconds for automatic exit from the menu.
To able to operate the CROMOBEAM260 with a light controller, adjust the DMX start address for the first a
DMX channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX
channel, adjust the start address 33 on the CROMOBEAM260. The other functions of the light effect panel
are then automatically assigned to the following addresses.
An example with the start address 33 is shown below:
Number of
DMX channels
Start address
(example)
DMX Address
occupied
Next possible start
address for unit No. 1
Next possible start
address for unit No. 2
Next possible start
address for unit No. 3
9
33
33-41
42
51
60
11
33
33-43
44
55
66
12
33
33-44
45
57
69
