ProLights ARCLED5118RGB, Руководство пользователя

Страница: 21 / 36

5
ARCLED5118RGB
- 2 - INSTALLATION
2.1 Mounting
ARCLED5118RGB may be set up on a solid and even surface. The unit can also be mounted upside down to
a cross arm. For fixing, stable mounting clips are required. The mounting place must be of sufficient stability
and be able to support a weight of 10 times of the unit’s weight.
• Install the projector at a suitable location by means of the mounting bracket (1).
• Always additionally secure the projector with the safety rope from falling down. For this purpose, fasten
the safety rope at a suitable position so that the maximum fall of the projector will be 20 cm.
• Adjust the projector and use the knob (2) to slightly release or tighten the locking mechanism of the
bracket if is necessary.
Fig.3
1
2
Beam Diameter (mt.)
0 2 4 6 8 Dist.(mt)
Diam.(mt)
Lux Center
0,52 1,05 1,58 2,10
682 346,5 176 85,8
15°
25°
45°
15°
Diam.(mt)
0,88 1,77 2,65 3,55
25°
Diam.(mt)
1,65 3,31 4,96 6,62
10
2,63
4,43
8,29
45°
45°
Lux Center 825 440 220 110 25°
Lux Center 1001 462 269,5 143
33
55
82,5 15°
4
3
2
1
0
1
2
3
4
Phonometric charts