Prolight Cromospot300, Руководство пользователя

Страница: 52 / 60

CROMOSPOT300
22
• Press UP/DOWN button to select
[SERVICE LOCK]
and press ENTER button.
• Select [ON] or [OFF] through the buttons UP/DOWN to enable access to service menu.
To edit the text that appears on the display in standby mode to refer to the following functions:
Display1
• Press the button MENU so many times until the display shows [SERVICE] , then press the button ENTER.
• Select in submenu [CONTENT] and press ENTER button to confirm the choice.
• Press UP/DOWN button to select [DISPLAY1] and press ENTER button.
• Edit first line of display content with UP/DOWN button. To move forward, the next letter, press
ENTER button; to turn back, instead, press MENU button.
Send display content
• Press the button MENU so many times until the display shows [SERVICE] , then press the button ENTER.
• Select in submenu [CONTENT] and press ENTER button to confirm the choice.
• Press UP/DOWN button to select
[SEND]
in order to transfer display content to all fixtures currently
connected via data cable.
3.17 FIXTURE INFORMATION
• Press the button MENU so many times until the display shows
[SERVICE]
, and press the button ENTER to
confirm.
• Select in submenu [NFO] and press ENTER button. The display will show the installed software version.
• Press the MENU button to go back or wait some seconds for automatic exit from the menu.