Prolife PA2 BT, Инструкция по эксплуатации

Страница: 16 / 76

16
en
INFORMATION PROVIDED BY MANUFACTURER
The Prolife PA2 BT is intended for use in the electromagnetic environment
specified below. The customer or the user of the Prolife PA2 BT should assure
that it is used in such an environment.
Electromagnetic Emissions: (IEC 60601–1–2)
Emission Test Compliance Electromagnetic Environment
RF emission CISPR 11 Group 1
The Prolife PA2 BT uses RF energy
only for internal functions. Therefore,
this RF emission is extremely weak and
there is little chance of it creating any
kind of interference whatsoever with
nearby electronic equipment
RF emissions CISPR 11 Class B
The Prolife PA2 BT is suitable for use
in all establishments, including domes-
tic establishments and those directly
connected to the public low voltage
power supply network that supplies
buildings used for domestic purposes
Harmonic emissions
IEC 61000–3–2
Not applicable
Voltage fluctuations / flicker
IEC 61000–3–3
Not applicable
Electromagnetic Immunity: (IEC 60601–1–2)
Immunity test
IEC 60601–1–2
test level
Compliance
level
Electromagnetic
environment–guidance
Electrostatic
discharge (ESD)
IEC 61000–4–2
±6 kV contact
±8 kV air ±6 kV contact
±8 kV air Floors should be wood,
concrete or ceramic tile.
If floors are covered with
synthetic material, the rela-
tive humidity should be at
least 30%