Flight
Flight Environment Requirements
1. Do not use the aircraft in severe weather conditions including wind speeds exceeding 8
m/s, snow, rain, and fog.
2. Fly in open areas. Tall structures and large metal structures may affect the accuracy of
the onboard compass and GPS system.
3. Avoid obstacles, crowds, high voltage power lines, trees, and bodies of water.
4. Minimize interference by avoiding areas with high levels of electromagnetism such as
locations near power lines, base stations, electrical substations, and broadcasting
towers.
5. Aircraft and battery performance are subject to environmental factors such as air density
and temperature. Be careful when flying 9842 ft (3000 m) or more above sea level, since
battery and aircraft performance may be reduced.
Flight Limit and Geo Zones
Unmanned aerial vehicle (UAV) operators should abide by the regulations from
self-regulatory organizations such as the International Civil Aviation Organization, the Federal
Aviation Administration, and local aviation authorities. For safety reasons, flight limits are
enabled by default to help users operate this aircraft safely and legally. Users can set flight
limits on height and distance. Altitude limits, distance limits, and GEO zones function
concurrently to manage flight safety when GPS is available. Only altitude can be limited when
GPS is unavailable.
Pre-Flight Checklist
1. Make sure the remote controller, mobile device, and Flight Battery are fully charged.
2. Make sure the Flight Battery and the propellers are mounted securely.
3. Make sure the aircraft wings are properly mounted.
4. Make sure the GPS and compass are functioning normally.
5. Make sure nothing is obstructing the motors and that they are functioning normally.
6. Make sure the ground control software is successfully connected to the aircraft.
© 2020 Prokura Innovations. All Rights Reserved.
