ProKlima 24960043, Инструкция по эксплуатации

Страница: 89 / 216

- 88 -
b. How to start body sensor?

The body sensor will be activated automatically after the appliance is turned on. The LED
lights of angles will be flashing by turns.

Long touch button “ ” for approximately 3 seconds to start the body sensor function. The
LED lights of angles will be flashing by turns.

Continuously touch button “ ” to shift angles. The body sensor starts working after 360°.
c. How does the body sensor work?

The fan will work in 360 degree oscillation first after the body sensor started; it will send out
beep sounds when get a signal back. After figuring out the suitable angle, the unit will swing
according to this angle for the following work.

If no signal is detected, the unit will detect again with oscillating 360 degree to find the
signals.

If more people signals appear after the angle already fixed, users should touch the button to
start the sensor again.
d. Detecting distance: Best within 2m from the fan
2) Vertical oscillation: Touch button “ ” to activate vertical oscillation function. Oscillation angle:
approximately 80°. Touch the button again, the vertical oscillation function is deactivated.
6. This appliance is initially set in mode “Normal”. You can also touch button “ ” to switch the mode
between “Normal”, “Natural”, “Sleeping” and “ECO”. The LED indicator changes accordingly. (No LED light
for the “Normal” mode.)
1) Normal: This appliance is initially set in mode “Normal”. Under this mode, the fan is working at low
wind speed. You can also touch button “ ” to set your desired wind speed at “Low → Medium →
High → Low …”.
2) Natural: Touch button “ ” to choose the natural mode. LED light of “ ” will be on. And then
touch button “ ” to choose your desired wind speed as follows:
/ / .