3
WARNING SIGNAL
Condition
Warning signal cycle
Shutdown signal cycle
Low battery alarm:
BI BI BI (pause)
BEE BEE BEE (pause)
Over heating alarm:
BI BI (pause)
BEE BEE (pause)
Over load alarm:
BI BI BI BI BI BI
Continuous tone
Note: BI is a short beep, and BEE is a longer beep.
※
USE INVERTER
STEP1:
SET THE POWER SWITCH AT THE OFF
ON
OFF
AC
OUTLET
STEP2:
WHEN CONNECTED TO ANY APPLIANCE, BE SURE TO TURN ON
INVERTER FIRST. AND THEN, TURN ON THE POWER SWITCH OF THE
APPLIANCE.
TURN ON
FIRSTLY
TURN ON
SECONDLY
DO NOT USE THE INVERTER EXCEED ITS MAXIMUM OUTPUT
POWER, WHEN CONNECTED TO ANY APPLIANCE. MAKE SURE
THE TOTAL STARTING POWER CAPACITY DOES NOT EXCEED THE
MAXIMUM OUTPUT POWER OF THE INVERTER.
BATTERY
