Projecta IS1210E, Руководство пользователя

Страница: 8 / 12

8
WHEN TO CHARGE
Your Jumpstarter is shipped partially charged. Therefore you should charge the Jumpstarter
before using it for the first time. It is recommended to charge fully after each use so the
Jumpstarter is ready in case it is required.
POWER BANK
The Jumpstarter has a USB output with 2.1A out. It is suitable to charge phones, tablets,
cameras and GPS devices. The Jumpstarter will turn off after 5 minutes of no activity or
the USB device has been fully charged.
If the USB output becomes overloaded, remove the device and check it. Turn the
Jumpstarter off and back on again, the USB output should work again
WARNING: Charging devices from the Jumpstarter will drain the battery and potentially
cause the Jumpstarter to fail to start your vehicle in an emergency. Recharge the
Jumpstarter as soon as possible.
FLOOD LIGHT
The Flood light has two functions, Flood light mode and SOS mode.
Flood light mode
Press and hold the light button for less than 3 seconds and the light will turn on. Press the
Light button again to turn the light off when you are finished.
Note: If the Jumpstarter is off and the light button is pressed, the button will need to be
pressed for at least ½ second before the light will turn on.
SOS mode
Press and hold the light button for more than 3 seconds and the work light will now
transmit SOS in Morse code. Press the light button again to turn off.
Note: The Flood light is not on a timer and will continue to operate until the battery is flat.