3
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
WARNING
All electrical connections must be in accordance with local codes and the National Electrical
Code. If you are unfamiliar with methods of installing electrical wiring, secure the services of
a qualified licensed electrician.
are made.
wet location.
em is clear of all material which could cause a
direct short and check all electrical connections to make sure they are tight.
ft. above the floor .
LIGHTED LAMP IS HOT!
Do not install any lamps closer than 6 in. from any curtain or similar
combustible material.
r changing the configuration of the track.
lighting track fixtures on the track.
To reduce the risk of fire and electrical shock, do not attempt to connect power tools, extension
cords, appliances, and the like to the track.
!"and allow lamps to cool down before replacing.
" $, remove the track head from the track before
re-lamping. Do not touch hot lens, guard or enclosure.
%&'*$+!/:*$;<=>;:*$!
CAUTION
To reduce the risk of fire and electric shock, use only with “HBT” track series.
This track system is to be supplied by a single /:*$?*$@!
This track system is not intended for use with a power supply cord or convenience receptacle
adaptor.
This track system is not intended to be suspended by a stem or cable.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Lowes.com
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 45 minutes
T;J >KQ%Rr, Phillips screwdriver, Electrical tape, Drill,
<U:!'<V!XYadder and Pencil
@KQ%Z
