Progressive Turf Equipment TDR-X, Руководство оператора и список запчастей

Страница: 46 / 75

TDR-X
Operator’s Manual
44
SUPPORTING MACHINE FOR SERVICE
You may be required to lift the mower off of the ground for servicing the
transport tires / wheels / bearings. Use a bottle or service jack to raise the
wheel from the ground and place a wooden block or other suitable support
under the rectangular tube.
Jack up the frame in the location shown in Figure 17
Do not support the machine on cinder blocks, hollow tiles or other
members that may fail under continuous load.
Never perform service on a machine that is supported solely by a
jack. Always ensure proper blocking is placed to support load during
service.
Transport tires must be changed with the wing decks on the ground.
TRANSPORT TIRES
Inspect tires daily for wear or damage. Check tire pressures weekly with an
accurate pressure gauge. Do not inflate tires beyond 20 psi.
NOTE THAT THE TIRES ARE NOT HIGHWAY RATED
Mounting and dismounting tires from rims can be dangerous and
should be performed by trained personnel using correct tools,
equipment, and procedures.
LONG-TERM STORAGE
If the mower is not to be used for an extended period of time (4 months or
longer) it is recommended that the following maintenance steps are followed:
1) Thoroughly wash mower, removing all grass clipping residue from
deck undersides & mower framework.
2) Add grease to all grease points.
3) Check gearbox oil for proper level.
4) Relieve tension on all V-belts by loosening the bolt on the deck gear
box.
5) Inspect all drive belts & pulleys.
6) Inspect all blade spindle bearings for excessive play.
7) Inspect all blades for serviceable condition.
When returning the mower to service after long-term storage:
8) Check tightness of all blade fasteners.
9) Add grease to all grease points.
10) Tension all V-belts.
11) Ensure all pivot points move freely.
12) Change gearbox oil.
Figure 17