Progress Lighting AirPro P2539 Скачать руководство пользователя страница 2

Limited Lifetime Warranty

Progress Lighting fan motors are warranted to the original purchaser to be free of electrical and/or mechanical 

defects for so long as the original purchaser owns the fan. Pull chain switches, reverse switches, capacitors and 

metal finishes are warranted to be free from defects in materials or workmanship for a period of 1 year from 

the date of purchase. Warping of wooden or plastic blades is not covered by this warranty nor is corrosion and/

or deterioration of any finishes for fans installed within ten miles of any sea coast. Extended warranties for 

ENERGY STAR

®

 qualified products may apply.

Progress Lighting ceiling fans with built-in LED light sources, when properly installed and under normal 

conditions of use, are warranted to be free from defects in material and workmanship which cause the light 

sources to fail to operate in accordance with the specifications for (i) five (5) years from the date of purchase 

on the LED Light modules and electrical components for fans used in single family residences, and (ii) three 

(3) years from the date of purchase on the LED Light modules and electrical components for fans used in 

multi-family or commercial applications. LED bulbs supplied by Progress Lighting carry no warranty other 

than manufacturer’s warranty. Non-LED bulbs carry no warranty.
With proof of purchase, the original purchaser may return the defective fan to the place of purchase during the 

first 30 days for replacement. After 30 days, the original purchaser MUST contact Progress Lighting at (864) 

678-1000 for repair or replacement which shall be determined in Progress Lighting’s sole discretion and shall 

be purchaser’s sole and exclusive remedy.
Labor  and  Shipping  Excluded.  This  warranty  does  not  cover  any  costs  or  fees  associated  with  the  labor 

(including, but not limited to, electrician’s fees) required to install, remove, or replace a fan or any fan parts.
This warranty shall not apply to any loss or damage resulting from (i) normal wear and tear or alteration, 

misuse, abuse or neglect, or (ii) improper installation, operation, repair or maintenance by original purchaser 

or a third party, including without limitation improper voltage supply or power surge, use of improper parts or 

accessories, unauthorized repair (made or attempted) or failure to provide maintenance to the fan.
THE FOREGOING WARRANTIES STATE PROGRESS LIGHTING’S ENTIRE WARRANTY OBLIGATION 

AND ORIGINAL PURCHASER’S SOLE AND EXCLUSIVE REMEDY RELATED TO SUCH PRODUCTS. 

PROGRESS LIGHTING IS NOT RESPONSIBLE FOR DAMAGES (INCLUDING INDIRECT, SPECIAL, 

INCIDENTIAL OR CONSEQUENTIAL), DUE TO PRODUCT FAILURE, WHETHER ARISING OUT OF 

BREACH OF WARRANTY, BREACH OF CONTRACT, OR OTHERWISE. THIS WARRANTY IS GIVEN 

IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESSED OR IMPLIED, INCLUDING THOSE 

OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitations 

of incidental or consequential damages, so the above limitations and exclusions may not apply to you. This 

warranty gives you specific rights and you may have other rights which vary from state to state.

Date Purchased

Store Purchased

UL Model No.

Serial No.

Vendor No.

UPC

111017

785247 214907
785247 214914
785247 214938

P2539

Содержание AirPro P2539





























Отзывы: