User Manual | Radiocontrol 6i-6o
·
7
Master
5-30 Vdc
5-30 Vdc
Power supply
Outputs
Outputs
Inputs
Inputs
Slave
Outputs
: The outputs are located at the top and are numbered
R1 to R6
. Each output is
assigned two terminal points that correspond to the normally open contact of its associated
relay. The maximum load that can be supported by each of the relays is 5 A at 220 Vac.
When an output has been activated, the module's
red LED
is activated.
To facilitate the passage of the hose from the inputs and outputs of each module to the devices
to be activated, three cable glands have been placed in the boxes.
Antenna
: The standard system is served with omnidirectional antennas and their respective
cables, 10 metres long, to connect to the modules. The module output consists of an SMA-type
female connector, where the 10-metre cable is connected, which is finished with an N connector
at the other end, where the antenna is connected.
Power supply
: Each of the modules is delivered with a 220 Vac 12 Vdc, 2A transformer, in
the case of modules powered at 220 Vac.
Power supply
