MACRO
.
Version 1.02
p.
6
Macro with command
Collect one or more commands in a ’super command’ called a macro. Give it a name and activate it with that
name. It works with either text message, phone call, DTMF-tones, or over the Internet. It is possible to create
10 macros.
A macro can be created with commands or with infrared codes from e.g. a remote control.
Create macro no. 1
with command
1234 M1 NAME
<COMMAND>
E.g.
1234 M0 TEMP <V1 R>
Creates macro M0 .. M9 with the name NAME and
attaches a command. More commands in the same
macro are divided by semicolon ’;’ without space.
Example:
1234 SHORT PULSE <S0;B0>
Play macro
TEMP
Plays the macro with the name TEMP
Delete macro no. 1
1234 M1
Deletes macro 1 (M0..M9).
For further help: see the manual on the CD or on
Connection of temperature probe
The unit has a built-in plug (AUX) for montage of e.g. temperature probe.
The built-in switch must be placed on the left side for the probe to be used. For the probe to measure
humidity and temperature the GSM unit needs to be set up. In following example boundaries are set at 4°C
and 30°C by temperature and at 35% RH and 65% RH by the relative humidity.