QUICK-MANUAL for multiGuard Technic RF
www.profort.com
p.
1
Mounting
1.
Prepare a SIM card so that the PIN code is 1234 or deactivated. Mount the card in the unit. The unit
now has 1234 as password or runs without a password. The card is turned the way shown below.
2.
Connect inputs, outputs and power cable (12-24 VAC/DC).
3.
Connect power. The unit first gives one short beep and then a red diode is lit. After approximately 20
sec. the diode flashes every 2 sec. and the unit is ready.
4.
Connect a rechargeable 3,6 V Li-ion battery.
The multiGuard unit interior
DIP-switch for analogue input 2 (AN 2)
1 ON:
0-10 VDC
2 ON:
0/4-20 mA
3 ON:
PT-100
4 ON:
Profort, PTC- probe
All OFF:
digital input
Voltage on in- and outputs
Output:
AC max 230 VAC, 6A
DC max 30 VDC, 6A
Inputs, digital:
max 12 VDC
max power 2 mA
Input, analogue 2: max 0-10 VDC
Press only voltage when DIP-
switch 1 is on and 2-4 are off
Input, analogue 1: Profort, PTC probe